新西兰维特利亚社区理工学院论文代写：建筑
重要的是在主要的建筑性能和主要的成本节约，扩大到运营和持续的服务。结果的三维设计方法不是简单的一个模型的建筑师的设计目标和空间相互作用显示三维建筑信息模型是一个用于数字数据随着设计阶段产生的信息库；因此设计、制造数据、成分说明，材料的调色板，时间表，标准和单数据库项目管理物流（富凯，D. 2006）。基于文献回顾，其他有利的BIM包括最小化风险，合理化生产，提高生产力，持续的设计目标，并帮助质量控制的明显的互动和复杂的分析工具（霍华德，R. 1998）。由于BIM方法的实际优势在于建筑项目业主，采用BIM的驱动器很可能是以客户为中心的进度。
BIM的目的是找出可能的好处，相互执行的AEC在所有阶段可以提供。方法应用Revit BIM实施的最有利的因素是意味着革命实践的设计（Leondes，C T 2005）。在伟大的前瞻性尽管在建设项目设计阶段，联合执行，这还没有完全被征服的，因此，可以由项目团队广泛实施相关数据交换标准的缺乏（Bedrick，J.等人2006）。这将是最困难的事情，在设计阶段的操作是困难的3D信息的互操作性。
然而，BIM软件能够保持文档的多少东西被使用，它是不能够得出多少劳动和努力需要作出这些创新和复杂的设计，这是一个特殊的成本顾问。他们将被证明是必要的AEC估计多方面的项目（霍华德，R 1998）。
The importance is in the major building performances and primary cost savings and broadens to the operations and continuance of the service. Outcomes of the 3D design approach isn’t simple a model of the Architects design objectives and spatial interactions revealed in 3D, a building information modeling is a storehouse for digital data along with the information generated by the design phase; it’s thus the design, fabrication data, composition instructions, materials palette, timetable, criteria and project management logistics in single database (Fukai, D. 2006). Based on literature review, other advantageous of BIM comprise minimized risks; rationalized production, enhance productivity, continuance of design objective, and helping in quality control by apparent interaction and complicated analytic tools (Howard, R. 1998). Since, the actual advantage of a BIM methodology is to the building project owner, the drive to employ a BIM will most probably be a client-focused progress.
Collaborative Working
A BIM’s purpose is to identify the possible perks that mutual execution throughout all phases of AEC can provide. The most advantageous factor of implementing BIM approach with application Revit is the means it revolutionizes the designing practice (Leondes, C. T. 2005). In spite of the great prospective for combined execution in the design stage of a construction project, this hasn’t been fully subjugated, as a result of the lack of pertinent data exchange benchmarks that can be extensively implemented by the project team (Bedrick, J. et. al 2006). It is going to be the most difficult thing to put into operation in the designing phase being that there’re difficulties for the interoperability of the 3D information.
However, BIM software is capable of maintaining documentation of how much things are used, it’s not capable of concluding how much labour and endeavour are needed to make these innovative and intricate designs, this is a speciality of cost consultants. They will turn out to be imperative to AEC estimators on multifaceted projects (Howard, R. 1998).
